How to reset maintenance service reminder message in Volvos V60, S60, XC60, V70, XC70 and S80 after changing oil & filters and inspecting your car. You don't

To reset the maintenance light on a 2019 Avalon you’re gonna use the arrow buttons on the steering wheel to navigate through the cluster screen. Now the first thing we’re going to do is: Turn the ignition to the accessory mode. With the foot off the brake, press the ENGINE START/STOP button twice. Go to ⚙️ SETTINGS.
So next, what you’ll do is push the TRIP button and hold it down for a few seconds, approximately 35 seconds, until you see the service item. Find the ENGINE OIL. This mode allows you to reset maintenance items like Engine Oil, Brake Pad, or Brake Fluid. Press the TRIP button briefly until you get to the Engine Oil screen.

Resetting the Maintenance Light. Turn the ignition to the On position. Set the odometer to trip A by pressing the trip control button in the bottom right corner of the instrument panel. Turn the ignition off. Press and hold the trip control button. Turn the ignition to the On position without releasing the trip control button.

The service reminder light is now reset. STEP 5. Start the engine. to verify the service maintenance light has been reset. NOTE: RESET THE MAINTENANCE LIGHT AFTER OIL CHANGE. This tutorial may also work to the following car model. Colt 1200; Colt 1400; Dodge Attitude; Mitsubishi Attrage; Mitsubishi Champ ; Mitsubishi Colt; Mitsubishi Express
STEP 4. SETTINGS: Notification can be switched on/off. TIME (months): Displays the time or distance until maintenance is due. DISTANCE (mile or km) :Select this item to set the maintenance period. The wrench indication/indicator light in the instrument cluster will be illuminated when the remaining distance is less than 1,000 km or 600 mile, or

STEP 5. Wait for 2 seconds till the new service maintenance schedule is now set. service maintenance reminder is complete. start the car to verify if the service reminder has been reset.

Volkswagen Golf Service Inspection Now Reset STEP 1. Turn OFF the ignition.; STEP 2. Press and hold the 0.0 button. Then turn the ignition on.Continue to hold the 0.0 button for 10-20 seconds until “ RESET INSPECT.SERVICE? ” appears.
Make sure you are on TRIP A screen. Go ahead and use the ODO/TRIP button to change the odometer to TRIP A. Switch off the ignition. Now turn off your car. Hold down the ODO/TRIP button while turning the car back on. Now at the same time press and hold this button okay and turn your car back on without starting.
In order to get rid of that, the first thing you do is: Turn on you car. So first, you want to make sure that you have the car in the on position. Display the TRIP A screen. Then you want to make sure that you have the TRIP A set to your mileage screen by using the ODO/TRIP button on the dash. Turn off the ignition. Here are the steps on how to reset 2013 Toyota Corolla Maintenance Light : Put the key in the ignition. Turn to the “ON” position. Depress the odometer button until your dash readout shows TRIP A. Switch the car OFF but keep the odometer button held down. With the odometer button held down, turn the key to the ON position again.
How do you reset oil service light Chevrolet GMC Trucks C Series. From years: 1999, 2000. Turn the ignition to run (one position before starting engine).
Once you get to the Settings you’re going to go to the OK button. Scroll down and select the MAINTENANCE. Next, you’re gonna use the button to scroll down to get to MAINTENANCE and press OK. Select the OIL AND FILTER. After that, you can see the OIL and FILTER, so go ahead and press the OK button again. Highlight and select RESET.
The following are the steps to follow to reset the maintenance light on a Honda CR-V: Insert the key into the ignition and turn the accessories (ACC) ON without starting the engine. You will find the Select /Reset button on the steering wheel or a knob on the dash of your car (Depending on the model year).
STEP 3. Use the NAVIGATION button to navigate to (Press and hold the ENTER button to access settings screen). For some model of Subaru Forester, you need to use the navigation button on the steering wheel. (ENTER/SET) (2012-2018)
Indicates that all maintenance is required to correspond to the driven distance on the maintenance schedule*. Comes approximately 5000 miles (8000 km) after the message has been reset. (The indicator will not work properly unless the message has been reset. Perform the necessary maintenance. Please reset the message after the maintenance is
Press and hold the INFO button. After that, press and hold that button to make the spanner flash. Release and then press the INFO button again. Next, you need to press the INFO button again and you’ll see CLEAR come up on the dash. Start your car. Start the engine to verify the indicator has been reset. Select the maintenance button by using the up and down arrows. Now use the up and down arrows to scroll and select the ‘reset’ button. This will help reset the maintenance light and turn it off. Select ‘yes’ to confirm the process and exit the menu.
First, insert the key and put the ignition on. Press the START button twice to turn the dash on and you don’t have to start the car up so don’t press the brake. Go to the ⚙️ USER SETTINGS tab. Then we’re gonna go to the ⚙️ little gear symbol by using the button on the steering wheel. Find and select SERVICE INTERVAL.
.